Liquid Freezer III 240 Black

The Liquid Freezer III is ready for immediate use thanks to its pre-installed radiator fans in push configuration. The fan cables are integrated into the jacket of the hoses so that only one cable needs to be connected to the motherboard. With the MX-6 thermal compound included in delivery, you have everything you need for quick and easy installation.

Intel has tested and confirmed the Liquid Freezer III on the i9-13900K/KF, i9-14900K/KF and i9-13900KS in the Enthusiast and Desktop category. In these tests, Intel considered both the mounting with contact frame and the cooler's performance.

For several generations, AMD has been using a multi-die chiplet design for its Ryzen desktop processors. Unlike Intel CPUs, the hotspot on these processors is not located centrally under the IHS (Integrated Heat Spreader), but is slightly offset. The AMD mounting solution therefore has a 5 mm offset in order to achieve optimum heat dissipation.

The Liquid Freezer III is multi-compatible with Intel and AMD sockets. Intel will release the new Arrow Lake processors on the LGA1851 socket in the future. ARCTIC customers don't need to worry that the new CPUs will also require new coolers. We guarantee full compatibility. All Liquid Freezer III can be used with the new LGA1851 socket from Intel without limitation.

The voltage converters of motherboards often work at their maximum temperature in combination with power-hungry CPUs. To compensate the lack of airflow from a tower cooler, the Liquid Freezer III works with a revised VRM fan. The 60 mm PWM-controlled fan enables almost silent cooling of the socket area when VRM cooling is insufficient, in cases with poor airflow or especially in overclocking scenarios. This enables a continuously higher load and a longer service life for the voltage converters.

The Liquid Freezer III is equipped with a specially developed PWM-controlled water pump, which has been further optimised in terms of both performance and noise. Thanks to the improved coldplate with an extended fin surface and optimised water pipes, the Liquid Freezer III increases its performance while maintaining quiet operation.

The cooling surface of the 38 mm thick radiator has been extended by 23 % by increasing the fin stack. This not only enables improved heat dissipation, but also a larger liquid volume. Consequently, the heat build-up in the water cooling system is slowed down and power and temperature peaks can be effectively managed over a longer period of time.

Compatibility

• Intel: 1700, 1851
• AMD: AM5, AM4
• All-In-One Connector: 4-Pin PWM Connector
• Split Connector: 3 x 4-Pin PWM Connector

Pump

• Pump: 800—2800 rpm (PWM controlled)
• Current | Voltage: 0.35 A | 12 V DC
• Cold Plate: Copper, Micro Skived Fins
• Tube Length: 450 mm
• Tube Diameter: Outer: 12.4 mm - Inner: 6.0 mm

Radiator

• Material: Aluminum
• Dimensions: 277 (L) x 120 (W) x 38 (H) mm

VRM Module

• VRM Fan: 400—2500 rpm (PWM controlled)
• Current | Voltage: 0.05 A | 12 V DC

Radiator Fans

• Fan: 2 x P12 PWM
• Speed: 200—1800 rpm
• Air Flow: 56.30 cfm | 95.65 m3/h
• Static Pressure: 2.20 mmH2O
• Bearing: Fluid Dynamic Bearing
• Current | Voltage: 0.10 A | 12 V DC
• Cable Length: 40 mm
• Connector: 4-Pin PWM Connector

Warranty

• Warranty: 6 Years Limited