Tower 300 Peach Fuzz Micro Tower

The Tower 300 Peach Fuzz is the newest addition to our Tower Series and it sure shows, now with a redesigned octagonal prism shape to set itself apart. Looking good is not the only thing the Tower excels at either, it can support up to a 420mm AIO radiator on the right side along with a total of up to eight 120mm or 140mm fans. Want an even more unique look then the Tower 300 Peach Fuzz Chassis Stand Kit is a great addition for horizontal placements. (Stand kit sold separately)

As the newest edition of the Tower Series, the Tower 300 inherited the classic vertical design but was updated with a new octagonal prism shape to meet today’s aesthetics. It may be small but it sure can pack a punch with support for up to 400mm GPUs, 420mm AlOs, and up to a 220mm PSU. If cooling is a concern then the Tower 300 has you covered with being able to accommodate up to eight 1 20mm or 1 40mm fans. Also did someone say upgrades, well the Tower 300 has optional 3.9" LCD screen kits as well as Horizontal Chassis stands sold separately so your build comes out exactly how you want it to.

The Tower series has been iconic for its vertical body designs and the Tower 300 follows in those footsteps. However, with its new octagonal prism design we were able to not only increase the viewing areas for the components inside but also allow for better airflow and bigger cooling options too. This gives the Tower 300 the classic looks of its predecessors but with even better performance and updated styling.

Supporting up to a 420mm AIO radiator on the right side of the case the Tower 300 is ready for some of the most demanding hardware. And to assist that AIO with optimal chassis temperature is the ability to mount up to eight 120mm or 140mm fans.

The Tower 300 Peach Fuzz features three 3mm tempered glass panels on the front and two perforated panels on each side. All are easily removable without tools. The Tower 300 Peach Fuzz features two 140mm PWM fans on the top to provide good cooling performance.

Our optional Horizontal Chassis Stand Kit comes not only with the stand itself but also included is a replacement bottom cover to delete the feet and provide a clean look.

The Tower 300 comes with a dedicated fan/AIO bracket on the right side of the chassis and is fully removable for easy installation. No more awkwardly holding fans and AlOs to mount to a chassis, just removed the bracket and mount your choice of fans or AIO and then easily remount the bracket into the chassis and you are all set to go.

Classic to the vertical body design the Tower 300 does well when it comes to staying cool. With dedicated intakes positioned to bring in cold fresh air and exhausts set up to vent the air the chassis has already processed providing optimal temperatures at all times. The Tower 300 Matcha Plum has well-designed filters on the top, rear, inner sides, and inner bottom layer to protect the system from dust.

Highlights

• CASE TYPE: Micro Tower
• DIMENSIONS: 551 x 342 x 281 mm, (22.5 x 14 x 11.5 inch)
• SIDE PANEL: 3mm Tempered Glass x 3
• MOTHERBOARD: 6.7” x 6.7” (Mini ITX), 9.6” x 9.6” (Micro ATX)
• EXPANSION SLOTS: 4
• I/O PORT: USB 3.2 (Gen 2) Type-C x 1, USB 3.0 x 2, HD Audio x 1
• Drives: 3 x 2.5" SSDs or 3 x 3.5" HDDs
• Included Fans: 2 x 140 x 140 x 25 mm CT140 fans (1500rpm, 30.5 dBA)
• FAN SUPPORT: Top: 2 x 120mm, 1 x 120mm, 2 x 140mm, 1 x 140mm, Right Side: 3 x 120mm, 2 x 120mm, 1 x 120mm, 3 x 140mm, 2 x 140mm, 1 x 140mm, Rear: 2 x 120mm, 1 x 120mm, 2 x 140mm, 1 x 140mm, Power Cover: 1 x 120mm, 1 x 140mm
• RADIATOR SUPPORT: Right Side(AIO): 1 x 360mm, 1 x 240mm, 1 x 120mm, 1 x 420mm, 1 x 280mm, 1 x 140mm
• CPU cooler height limitation: 210mm
• GPU length limitation: 280mm(With power cover), 400mm(Without power cover)
• PSU length limitation: 220mm
• PSU: Standard PS2 PSU (optional)
• Warranty: 3 Years Limited