4K120Hz HDMI Extender

4K@120Hz HDMI Extender, Easily extends HDMI 4K@120Hz signals up to 132ft (40M) over a single Cat6/7 networking cable with IR, Nearly zero latency, HDR10, HDCP2.3, EDID, Bi-directional IR, Metal Housing

Easily extends HDMI signals to 132ft (40m) over Cat6/7 cabling and IR Bi-directional remote-control HDMI device. Supports Ultra HD 4K@120Hz resolution for a smooth and immersive viewing experience

Supports Ultra HD video resolution up to 4K (3840x2160) @120Hz, HDR10, HDCP 2.3, YUV 4:4:4, 36-bit color depth for crystal-clear image quality

Display Stream Compression (DSC) is enabling increased display resolutions and frame rates over existing physical interfaces and make devices smaller and lighter. Compliant with DSC 1.2a

Provides STD and TV modes for optimal image quality and excellent compatibility with a wide range of devices

This 4K 120Hz HDMI extender with IR supports reliability transmission of HDMI signals up to 132ft (40m) over RJ45 network to a remote HDMI display

With built in Bi-directional IR extension over Cat6/7 cable allows you to control the HDMI source device at a remote location. (IR blaster/receiver cables are included.)

Comes with one HDMI video input port, one HDMI video output port, two RJ45 network ports, two 3.5mm IR emitter ports, two 3.5mm IR receiver ports, two reset buttons, one EDID slide switch to select standard mode or TV mode, and two DC power jacks (12V/1A)

Highlights

• HDMI: 1 x input, 1 x output
• Resolution: 4096 x 2160@60Hz / 50Hz / 30Hz / 25Hz / 24Hz, 3840 x 2160@120Hz / 60Hz / 50Hz / 30Hz / 25Hz / 24Hz, 1920 x 1080@120Hz / 60Hz / 50Hz / 30Hz / 25Hz / 24Hz, 1280 x 720p@60Hz / 50Hz, 1024 x 576p@50Hz, 640 x 480p@60Hz
• HDCP: 2.3/2.2/1.4
• Color depth: 36-bit (12-bit per channel)
• Transfer rate: up to 32Gbps (8Gbps per data channel)
• Transmission distance: up to 132 ft (40m) via Cat6/7 cable
• TMDS character rate: up to 800MHz
• HDMI: Dolby 5.1/7.1 and Atmos (need to switch to TV EDID mode), DTS 5.1/7.1, and PCM 2/5.1/7.1
• Built Bi-directional IR remote control, allows you to control the HDMI source device at the remote
• Full frequency: 20KHz to 60KHz
• EDID Switch: Select STD mode or pass through to TV EDID mode
• Power Adapter: Input: AC 100-240V/50-60Hz, Output: DC 12V/1A
• Warranty: 2 years limited